|
Oil Mist Lubrication Systems The OIL MIST LUBRICATION UNIT Model AM-OML-15 is specially designed to cope with the requirement where oilling is to be supplied in the form of Fog/mist. It is available both on intermittent/continuous discharge.
Operational Fuction
The Oil Mist Lubricator consists with an imported acrylic reservoir which is joined with a single or multi outlet block. The oil block is primarily a metering block in which oil discharge corresponds to stroke of small pistons provided inside the block.The pistons which are of spring return type moves with the pressurised air connected to air inlet point of the block. With the movement of pistons, oil is sucked from the reservoir and the sucked quantity is controlled/adjusted by adjusting stroke of piston by an adjusting screw.
Device
The system is a combination of a acrylic reservoir tank, Vertical float switch, Oil Block, Air Regulator, Solenoid Valve, FRL Unit, Nozzle for Mist, Timer (for intermittent), Four nos. mounting brackets are provided on the back wall of Mist unit to mount the unit on to any vertical surface.
Installation
The systems are suggested to install at some convenient place preferably very nearer to the lubrication points. The mounting dimension are given in the drawing. Mostly 4mm and 1 Omm Nylon Tube is required to connect from block with the lubrication point.
Precaution
- Mount the systems away from excessive heat, dust and moisture.
- Fill clean and fresh oil of viscosity between 40-60 cSt.
- Always keep the unit clean by periodically wiping with cloth.
Field of Application
The Oil Mist Lubricator is best suitable for Conveyors, Sliding chains, Stripes, Spindles, Drives of Power Presses and Shearing Machines, Textile Machines etc,
Technical Specifications
|
Model-AM-OML-15
|
(intermittent lubrication.) Reservoir cap. 1.5 Ltrs., Air pressure req. 4-6 Kg/cm2, input voltage 220 volts Lubricant: any lubricant with viscosity 10-1000 c St at 40oC.
|
|
Model AM-OML-15
|
(continuous lubrication.) Reservoir cap. 1.5 Ltrs., Air pressure req, 4-6 Kg/cm2, input voltage 220 volts Lubricant: any lubricant with viscosity 10-1000 c St at 40oC.
|
Part Name
- Base Plate
- Top Cover (Acrylic)
- Oil Reservoir
- Connection Conduit (Electrical)
- Lub. Line
- Automiser
- Flow Control Valve (Pneumatic)
- Solenoid Valve for Air Line
- Non Return Valve
- Oil Filler Plug
- Air Relief Valve
- Solenoid Valve for Oil-220 volts
- Pressure Gauge
- Flow Control Valve (Oil)
- Mist Box
|
Phone : 91-20-65261127
Fax : 91-20-24378336
